Introduction to Nail Tools

May 09, 2024

Leave a message

Crystal pliers: Only used for making crystal nails, cannot be replaced with finger skin pliers, otherwise it may cause crystal nails to break.

Nail clipper: mainly used to trim all types of nails, including crystal nails and natural nails.

Finger clippers: used to cut off excess nail skin.

Plastic or bristle brush: used for cleaning nails and crystal nails during hand care.

Nail file: used to trim the leading edge of natural nails.

Sandstick: used for pushing fingertips.

Scissors: used to cut fiber products such as nylon, silk, and fiberglass armor.

Small tweezers: used to hold nail clips, diamonds, or to clip the nail skin for trimming.


Nail clippers
1. Classification: Nail clippers are divided into sizes, followed by the shape of the front end, with two types: flat and sloping.

2. Usage: After washing your hands, first use a flat nail clipper to cut the desired length. If the nail grooves on both sides are too deep and extend towards the nail grooves, use a slanted nail clipper to cut off the nails on both sides.

3. Precautions: When cutting nails, whether using flat or slanted nail clippers, do not cut them too deep. If you frequently cut your nails too deep, the nail bed will become shorter and shorter, which will affect the appearance of the nails, especially for women. When repairing square nails, do not cut off the two corners at the front of the nail.


Nail file
(1) Classification: Nail trimming files are divided into steel files and colored files, commonly known as flower files.

2. Usage: Use a steel or flower file to polish the cut nails into the desired shape in the order of starting from both sides and then the front end.

(Usually, nails come in six shapes: A, square B, square circular C, oval D, pointed E, circular F, and trumpet. Nail technicians can suggest customers choose the shape that suits them based on their hand shape.)

3. Precautions: When using steel files and flower files to polish the shape of nails, it is important to pay attention to the fine grinding on both sides of the nails and the rounded shape of the front end

 

Soaking Hand Bowl
1. Classification: There are two types of hand soaking bowls: imported and domestic. Professional hand soaking bowls should be exactly the shape of one hand, and placing the hand on top should match the shape of the bowl.

2. Usage: Pour hand soaking solution or warm water into a hand soaking bowl, soak your left hand for five minutes, then switch to your right hand. This can clean your nails and soften your fingertips.

3. Precautions: Do not put cold water or too hot water into the hand soaking bowl.

 

Folding Fingerskin Softener
Finger skin softener is a milky white liquid that can accelerate the degree of softening.

1. Usage: Dry the soaked hands with a towel and apply the softener evenly on the surface of the nails.

2. Precautions: Do not apply softeners to the nail plate to prevent it from being softened.

 

Pushing leather rod
1. Classification: The leather pushing rod is divided into wooden pushing rod, steel pushing rod, and sand pushing rod.

2. Usage: In professional beauty salons, steel push rods are commonly used. Use the elliptical flat end to push the aging skin of the fingers towards the palm of the hand, making the nail plate appear slender. Use a scraper on the other end to scrape off any remaining keratin on the nails.

3. Precautions: When pushing the fingertips, the force should be moderate and not too strong to avoid damaging the methyl group, otherwise it will affect the growth of the nails.

 

Nipper
1. Classification: Finger clippers are generally made of stainless steel materials, including scissor shaped (curved fingertip scissors) and pliers shaped.

2. Usage: Use fingertips to cut off dead skin and thorns that have just been pushed, making the fingers look beautiful and neat.

3. Precautions: When using fingertips, be careful not to pull them, cut them directly to avoid damaging the fingertips, and do not cut them too deep.

 

Nail massage oil
1. Classification: Nail massage oil, also known as nutrient oil or nail edge oil, can be divided into: almond containing, vitamin A containing, and vitamin E containing nutrients.

2. Usage: Apply a small amount of massage oil around the trimmed fingertips of both hands, and gently massage with your fingers. It can moisturize the fingerskin, prevent thorns from growing around the nails, make the skin soft, and protect the nails from being healthy and shiny.

3. Precautions: Nutrient oil should be used daily, and the amount should not be too large, otherwise it will appear too greasy.

 

Polishing file
1. Classification: There are two types: three sided polishing strips and four sided polishing blocks.

2. Usage: Generally, polish in the order of black, white, and gray. The black surface can remove the keratin on the nail surface, the white surface can polish the nail surface finer, and the gray surface can polish the surface brighter. After these three procedures, the nail will appear crystal clear and shiny.

3. Precautions: If the customer's nail plate is thin, do not use the thickest polishing block on all four sides to polish it, otherwise the nail will become thinner and thinner. Do not rub back and forth during polishing, as the heat generated by friction can be uncomfortable.

 

Base oil
1. Classification: Bottom oil includes calcium base oil, protein base oil, moisturizing base oil, etc.

2. Usage: Apply base oil after polishing the nails. Choose a base oil based on the texture of the customer's nails. If the customer's nails are soft, calcium oil can be added. If nail oil is needed, applying base oil before applying nail oil can prevent the nails from turning yellow and provide nutrition.

3. Precautions: Before applying nail polish in professional nail art, a base oil must be applied.

 

Methyl oil
1. Classification: Armor oil is divided into ordinary type and quick drying type.

2. Usage: A. Application of dark nail polish: The amount of dark nail polish applied at a time should not be too much, otherwise it will appear thick and uneven. Apply 2-3 times, each time thinner, for better results. B, The application method of light colored nail polish: Improper use of light colored nail polish series such as pink can easily reveal uneven traces of application. When applying the first layer, special attention should be paid to the amount of nail polish dipped and the inclination of the brush, and the second layer should be applied as soon as possible before the first layer is dry. This is very important. C, Pearl nail polish application method: Pearl nail polish is easy to dry, dip a little more nail polish on the brush and apply it as soon as possible. Otherwise, it will appear uneven, so the brush should be used upright. To avoid leaving marks, apply on both sides first and then in the middle.

3. Precautions: When applying nail polish, do not apply it to the fingertips or nail grooves, as it may appear dirty and messy, and it may also affect the breathing of the nails.

 

Bright oil
1. Type: Bright oil can be divided into ordinary bright oil and UV bright oil.

2. Usage: Apply polish on the dried nail polish to protect the polish and extend the shedding time. After making crystal armor, use anti yellowing and anti UV glossy oil.

3. Precautions: Shining oil should not be applied too thick.