Phototherapy nail is an advanced nail simulation technology that can solidify the phototherapy gel through the light and action of the ultraviolet A line. The pure natural resin material is used, which can not only protect the nail and nail cover functions, but also effectively correct the nail shape, making the nail more transparent and moving.
French Phototherapy Nail Production Process
1.The service time is 180 minutes
2. Essential tools and materials
Mango hand disinfectant, disinfectant cotton and containers, towels, disposable tablecloths, hand pillows, 75% alcohol, cotton sheets, nail polish, orange wood sticks, nail clippers, 180 grit sandbars, 100 grit sandbars, hand brushes, hand soaking bowls, Mango finger skin softener, Mango magic nutrient oil, finger skin push, finger skin scissors, BN phototherapy cleaning solution, BN phototherapy pen, phototherapy lamp, BN finger support plate, BN shaping tweezers, BN three in one phototherapy glue, BN wash free sealing layer, storage bag.
3. Preparation steps
1) Clean your hands with Mango Hand Disinfection spray.
2) Use mango hand disinfection spray to disinfect the workbench.
3) Clean hands of customers with mango hand disinfection spray
4) Take out a clean towel from the disinfection cabinet and lay it on the workbench. Use a hand pillow to place it on the customer's wrist under the towel.
5) Prepare metal tools that have been disinfected for later use.
6) Prepare the phototherapy lamp and turn it on for use.
7) The operating procedures are from the left hand to the right hand, from the little finger to the thumb of each hand.
8) Provide customers with natural nail repair on their hands (from disinfection to cutting off their fingertips).
4. Standard operating procedure for French phototherapy nail
1) Gently scratch the surface of the nail with a 180 grit sanding strip to increase the adhesive contact area.
2) Use a hand brush to clean the dust on the surface of the nails and on both sides of the nail groove.
4) Apply a thin layer of three in one phototherapy gel to the nails (excluding the thumb) using a phototherapy pen.
5) Use a light therapy lamp to illuminate for 30 seconds, while using the left hand to illuminate the lamp, you can also use the right hand, and then use the light therapy lamp to illuminate the right hand for 30 seconds.
6) Use a phototherapy pen to apply a thin layer of three in one phototherapy gel to the fingernails of both hands.
7) Illuminate with a light therapy lamp for 30 seconds.
8) Wear a finger brace and adjust it to fit the shape of the finger brace.
9) Take an appropriate amount of white solid glue with a pen, and place it on the front edge of the left little finger. Use the side of the pen to create a "Z" shape along the natural nail smile line, creating a white nail front edge that is clear, smooth, and perfect.
10) Use a light therapy lamp to illuminate for 2 minutes. While shining the light on the left little finger, you can also do the right little finger. Then, use a light therapy lamp to illuminate for 2 minutes.
11) Squeeze the front edge of the left little finger before the phototherapy is finalized, and use shaping forceps to place it on the smiling side of the front edge of the nail, gently squeezing it relative to each other to create a c-arc.
12) Squeeze the edge of the right little finger before the phototherapy is finalized, and use shaping forceps to place them on both sides of the smile line at the front edge of the nail, gently squeezing each other to create a c-arc.
13) Repeat steps (9-12) with the left and right hands, and complete the production of the white leading edge.
14) Take an appropriate amount of pink phototherapy gel with a phototherapy pen and spread it over the entire nail board (excluding the thumb) to form a smooth surface.
15) Use a light therapy lamp to illuminate the left hand for 2 minutes while also doing the right hand, then use the light therapy lamp to illuminate the right hand for 2 minutes.
16) Use a phototherapy pen to take an appropriate amount of pink phototherapy gel and spread it over the nail plates of both hands, forming a smooth surface.
17) Use a light therapy lamp to illuminate the left and right thumbs for 2 minutes.
18) Remove the finger brace.
19) Flip the customer's hands over and use a light therapy lamp to illuminate the opposite side of the front edge of the nail for 1 minute.
20) Dip a cotton swab in phototherapy cleaning solution to clean the surface of the nails and below the front edge of the nails.
21) Use a 180 grit sanding strip to polish the surface of the nails and shape them.
22) Use a hand brush to clean the dust on the surface of the nails and on both sides of the nail groove.
23) Use a cotton swab dipped in alcohol to clean the surface of the nails.
24) Apply a wash free sealing layer on the nails (excluding the thumb).
25) Illuminate for 2.5 minutes, while using the left hand to illuminate the light, you can also use the right hand, and then use the phototherapy light to illuminate the right hand for 2.5 minutes.
26) Repeat steps (24-25) on the left and right thumbs.
27) Each step of applying phototherapy should be about 0.8mm away from the posterior edge of the nail, fingerskin, and both sides of the nail groove. If necessary, immediately scrape off any spilled phototherapy with an orange stick, and then use a phototherapy lamp to illuminate it.
29) Apply nutrient oil to the skin at the back edge of the nails and gently massage the fingers.
30) Soak all used metal tools in an ultrasonic cleaning and disinfection device for disinfection.
31) Clean the workbench.
32) Charging, establishing customer profiles, and scheduling the next service time.