1. Product issues
If the nail seal is not bright enough, it may be caused by the product itself. Some products may have yellowing issues with the seal due to issues with content and raw materials. This may not be something that can be changed by technique. If this situation occurs, please do not hesitate to blacklist! Try reputable brand products!
2. The lighting time is too short
Generally speaking, if the sealing time is too short, it will also have an impact. The sealing time is usually longer, UV lamps generally take 3 minutes, and LED lamps generally take 90 seconds. Some lights on the market now have insufficient power, so when using them, it is necessary to extend the time appropriately. And be careful not to apply too thick!
3. Lamp tube aging
For some aging UV lamps, it can also have a significant impact on the sealing effect. So if the usage frequency is relatively high, it is recommended to replace the UV lamp every two months as much as possible
4. Immediately touch after lighting up
Some inexperienced manicures, due to impatience, will immediately wipe off newly completed manicures. But if you want the seal to be bright, you cannot touch it immediately after lighting up, nor can you repeatedly wipe it with a cotton pad, otherwise the just applied seal may have to be scrapped again.
5. After sealing, add glossy oil
Also, some beginners are confused and can't figure it out. After applying a seal, they still need to apply glossy oil, which is not acceptable! If you accidentally apply shiny oil, you should immediately wash it off with nail polish remover. After sealing, it is not allowed to apply glossy oil again!
