Nail reinforcement glue is not needed by everyone, and it is only used in the following two situations:
1. If the nails are uneven or thin and soft, you can apply a layer of reinforcement glue after the base glue, and then apply nail polish glue. The reinforcement steps should be: bottom adhesive - reinforcement adhesive - color - sealing layer.
2. If you find that the nail surface is uneven or you want to reinforce and paste the jewelry after making the style, you can apply reinforcement glue to the lamp and then seal it.
The basic steps of nail art
1. Manicure shape, push finger skin.
2. Cut the skin of your fingers and polish the surface of your nails. Use a sponge file to polish the nail surface, and during polishing, the back edge and front section of the nail should be polished neatly. If the nail surface is not smooth, the nail polish glue is easy to fall off.
3. Clean the nail surface. Apply protein binding agent. Clean the nail surface with specialized cleaning solution. When applying protein binders, it is important to apply them evenly and avoid being too thin or too thick. Then, light up the phototherapy lamp for 1 minute (LED lamp for 30 seconds). The protein binding agent should not be illuminated for less than 1 minute, and should not be dried below 1 minute, as it is prone to detachment. It should not exceed one minute. If the lighting time is too long, it will dry the surface adhesive, which can enhance the adhesion with colored nail polish adhesive.
4. Apply nail polish adhesive. Wrap the edges before applying, sweep the brush clean at the bottle mouth before applying, and then apply a thin edge around the front edge of the nail. Apply nail polish glue thinly and evenly on the nail surface. When applying nail polish glue, it should be thin and even, as excessive thickness can cause wrinkles. Illuminate the light therapy lamp for 2 minutes (LED lamp for 1 minute), and the first coat of nail polish adhesive must be illuminated for 2 minutes. If the time is not enough, it cannot be completely cured, and it is easy for the whole piece to tear or the edges to curl up. Moreover, if the first coat is not illuminated dry, it is easy for the color to layer with the second coat.
5. Apply a second coat of nail polish adhesive. The method of applying the second coat of nail polish glue is the same as the first coat.
6. Apply the first sealing layer. Light therapy light for 1 minute (LED light for 30 seconds)
7. Apply a second layer of sealing. Light therapy light for 2 minutes (LED light for 1 minute)
8. Clean the surface with cleaning solution. After 2 minutes of exposure to the sealing layer, clean the surface with cleaning solution. Avoid using other cleaning liquids, as their poor cleaning effect on floating glue can affect the glossiness of the sealing layer. In this way, a shiny and simple nail art is completed!
